An audit without a shutdown.
BOX2M mobile cloud audit kits measure electricity, water and environment on site without interrupting power or flow. Data goes straight to the platform, so the report is ready to download when the measurement ends. For energy auditors, ESCOs and consultants, and for sites that want to measure before they invest.
Good decisions start with a measured baseline.
Companies above 10 TJ a year without an energy management system need an energy audit at least every four years.
A baseline needs measured data over a representative period, for each significant energy use.
Measure before you size PV, a battery, a compressor or a new supply contract.
Three kits, one platform.
Electrical energy audit kit
IP65 case, smart power meter with 0.2% accuracy, split-core transducers 100–4000 A (0.5%) or the site's own CTs and VTs. LV, MV and HV.
Fluids audit kit
Clamp-on ultrasonic probes sized to the pipe, about 1% accuracy. Index, flow and velocity, with no pipe cuts.
Environment audit kit
Emissions, gamma radiation, air particles and ambient conditions, on a tripod near infrastructure or civilian sites.
How an audit with BOX2M runs.
Installed without interruption
The kits connect without cutting power or flow. Low-voltage connections are made inside the case.
Move it point by point
You decide where the kit goes next. Sampling rate and parameters are set per scenario.
Reports ready to download
Nothing more to do on site after the wiring. Reports come from the platform in PDF or CSV.
Real-time audit
Watch the measurement live, spot anomalies and potential energy fraud while the kit is still on site.
Buy or rent
Buy the kit with a year of platform and connectivity included, or rent it monthly.
From audit to monitoring
Keep the points that matter as permanent metering on the same platform.
Sized to your site.
- Electricity: all relevant parameters, LV to HV
- Water and homogeneous liquids: index, flow, velocity
- Environment: emissions, gamma radiation, particles, ambient
- Where: factories, industrial and business parks, DSOs, clinics, farms, smart-city sites
Example configuration. Every site is sized after the site survey.
Real cabinets, real sites.
Seven steps, one team.
Cost and duration depend on the complexity and scale of the site. A pilot on a few sites comes first.
Site survey
Meters, boards, signals, networks and constraints on site.
Solution build
The configuration: meters, sensors, cabinets, network, platform.
Design, assembly and configuration
Cabinets built and devices configured for your site.
Live testing in the BOX2M lab
Everything runs in our lab and test cloud before it ships.
Installation
By a specialised technician, without stopping production or supply.
Commissioning and acceptance
Live data checked against your meters, alarms tested.
Life-cycle support
Monitoring of the devices themselves, updates and changes.
Tell us about your site.
Send us what you have: a single-line diagram, a meter list, or a few lines about the site. One of our engineers answers within one business day.