Know the energy cost of every product.
Your monthly bill says how much you paid. It doesn't say where, when and why the energy went. BOX2M meters every utility per line, machine and building, without stopping production, and turns it into cost and CO₂ per product.
Measured data is becoming an obligation.
Companies using more than 85 TJ a year must run an energy management system. Above 10 TJ, an energy audit at least every four years.
An energy baseline, performance indicators and proof of improvement, built on metered data instead of estimates.
Buyers and lenders ask for energy and CO₂ per product. Where CSRD applies, energy use is a required disclosure.
Where BOX2M measures in a factory.
What changes on the shop floor.
Metering of every utility
Electricity, gas, water, steam, heat and compressed air, per line, machine and building, automatically, 24/7.
Retrofit, not replace
We read the meters and signals you already have and add only what is missing. No refurbishment, no production stop.
Machine usage reports
Running cycles, run time, idle time and starts per machine and shift. The basis for predictive maintenance.
Alarms and load control
Peaks, deviations and meters that stop reporting raise an alarm. Loads switch manually or by playbook.
Cost and CO₂ per product
Energy cost and carbon per product, process or piece of equipment, per supplier tariff, in EUR, RON, USD or GBP.
Industrial parks: tenant re-billing
Every tenant metered and billed against contractual maximums and your billing day.
Sized to your site.
- Substations: HV/MV, MV/MV and MV/LV, grid feeders, local production and storage
- Production: lines, machinery, robots, tools, electric motors
- Facility systems: elevators, cranes, conveyor belts, HVAC, lighting, ITC equipment
- Electricity: main boards and sub-boards, legacy sub-metering retrofitted
- Gas: boilers, ovens, process heat
- Water: intake, process, cooling
- Steam: vortex meters on production and consumption
- Compressed air: flow and pressure
- Environment: temperature, humidity, emissions
Example configuration. Every site is sized after the site survey.
Real cabinets, real sites.
Seven steps, one team.
Cost and duration depend on the complexity and scale of the site. A pilot on a few sites comes first.
Site survey
Meters, boards, signals, networks and constraints on site.
Solution build
The configuration: meters, sensors, cabinets, network, platform.
Design, assembly and configuration
Cabinets built and devices configured for your site.
Live testing in the BOX2M lab
Everything runs in our lab and test cloud before it ships.
Installation
By a specialised technician, without stopping production or supply.
Commissioning and acceptance
Live data checked against your meters, alarms tested.
Life-cycle support
Monitoring of the devices themselves, updates and changes.
Tell us about your site.
Send us what you have: a single-line diagram, a meter list, or a few lines about the site. One of our engineers answers within one business day.