Field hardware, built and tested per site.
Around the MØ device, BOX2M designs cabinets, builds mobile audit kits and integrates meters and sensors from established vendors. Everything is assembled and tested in our lab before it goes on site.
Designed for the site in front of us.
Substation monitoring
0.4/0.7/0.8 kV, 6/10/20 kV and 110/220 kV, for factories, buildings, power plants, parks and smart cities.
Electrical sub-metering
Adaptive cabinets for any field architecture, density and complexity.
Retrofit of existing meters
Reads a wide range of existing meter signals and protocols, instead of replacing the meters.
Signal gathering
Legacy signals and old industrial infrastructure, over our own radio and cable networks where needed.
Measure anywhere, without a shutdown.
IP65 cases with an MØ device inside. Buy with a year of platform and connectivity, or rent monthly.
Electrical energy
Smart power meter, 0.2% accuracy. Split-core transducers 100–4000 A (0.5%) or the site's CTs and VTs. LV, MV, HV. No power interruption.
Fluids
Clamp-on ultrasonic sensors sized to the pipe, about 1% accuracy. Index, flow, velocity. No pipe cuts, no flow interruption.
Environment
Emissions, gamma radiation, air particles and ambient conditions. For smart cities, clinics, factories and farms.
Whatever reaches the site.
Cellular
The default. Any operator, internal SIM, optional external antenna.
LoRa
Battery-powered readers and sensors across a site or a park.
Satellite
Iridium and Starlink in operation, for isolated sites and backup monitoring.
Fixed
Ethernet where the site network allows it.
From established vendors.
BOX2M doesn't make meters. We integrate the ones that fit the job, and the ones you already have: 131 models so far, from vendors such as Lovato, Acrel, Honeywell, Itron, Zenner, ADFWEB, ICP DAS, Milesight and Teltonika.
Supported devices
Tell us about your site.
Send us what you have: a single-line diagram, a meter list, or a few lines about the site. One of our engineers answers within one business day.